WatchTool.co.uk Supplying Watch Tools

Hammers are useful tools in a watch maker’s kit to drive in screws and pushing some parts like bracelet pins in place. The Brass and Metal planishing hammer has a solid steel head with screws. Using this screw on contraption, a metal and brass head can be attached or removed. The Brass and Nylon hammer has a nylon and brass head that can be screwed on to the solid steel head. The Solid Brass Repousse hammer with a twist has solid brass head with a four piece stainless steel screwdriver set. The shaft and handle can be taken apart through an internal screw. This is a very useful tool as the screw driver set can also be used by the watch makers. It is considered to be a smart and handy tool in the market.

The Bergeon 1447 Boxwood mallet measures 75 * 225 mm. It is useful to replace bracelet pins without marking the metal finish of the bracelets. It is durable and has been designed ergonomically for maximum comfort. It has a large flat face on one side and a conical nose on the other side which can be used to drive in pins with precision. The Bergeon 1438-1 watchmakers hammer 30gm has a wooden handle and is made of polished steel. It measures 50 * 200 mm. There are other models which share the same features as the 30 gm model given above. The other models weigh at 40gm, 55 gm and 70 gm. The Watchmakers Hammer has a head that is 80 mm long and the tool weighs 65 gms. It is a high quality product with an overall length 230 mm. The Watchmakers Hammer 55 grams - has a wooden handle and a polished steel head. It measures 70 * 200 mm.